:no_upscale())
Lower electricity bills
Generate electricity on site and reduce the power you need to buy from the grid. We design around when you use energy to make each panel work harder for your organisation.
COMMERCIAL SOLAR FOR BUSINESSES & ORGANISATIONS
From factories, cold stores and food production sites to car showrooms and large data centres, EPC designs and installs solar around your electricity use, site and budget. Dedicated electrical engineers support design, project management and quality control, with health and safety and fire-risk reduction considered throughout. We also welcome smaller businesses and community buildings.
Payback as quick as 3 years
on suitable sites.*A straightforward first conversation. No obligation to proceed.
*Subject to energy consumption, the amount of solar electricity used on site, electricity tariffs, system cost and site conditions. Your proposal will set out your estimated payback and the assumptions behind it.
:no_upscale())
:no_upscale())
:no_upscale())
The commercial case
A system matched to your electricity use, with a clear view of the costs and long-term return.
:no_upscale())
Generate electricity on site and reduce the power you need to buy from the grid. We design around when you use energy to make each panel work harder for your organisation.
:no_upscale())
Sites with strong daytime electricity use can achieve faster payback. We calculate the return for your building and consumption, so you can make an informed decision.
Subject to consumption, on-site solar use, tariffs, system cost and site conditions. Your proposal sets out estimated payback and assumptions.
:no_upscale())
Producing some of your own electricity reduces your reliance on purchased power and gives you greater control over a recurring overhead.
:no_upscale())
Solar is a long-term energy asset. Our proposal considers expected generation, running costs and equipment replacement assumptions alongside the initial investment.
:no_upscale())
Reduce reliance on grid electricity and demonstrate practical progress towards your sustainability commitments. Generation monitoring helps you track performance.
:no_upscale())
Put suitable roof space to work generating electricity. Where appropriate, we can also assess alternative locations and how solar fits with future site improvements.
*Subject to energy consumption, the amount of solar electricity used on site, electricity tariffs, system cost and site conditions. Your proposal will set out your estimated payback and the assumptions behind it.
Built around your organisation
If your organisation runs refrigeration, production equipment, cooling, IT systems or vehicle charging, electricity can be a major overhead. EPC designs solar around the power you use, with particular attention to demand during daylight hours and the opportunity to use generation on site.
Factories, engineering businesses, plastics processors and packaging plants: assess solar against production schedules, machinery, compressors and daytime electricity demand.
Cold stores, chilled warehouses and refrigerated distribution centres: assess sustained refrigeration demand against solar generation throughout the day.
Food processors, commercial bakeries, dairies, breweries and bottling plants: design around electric processing, refrigeration, packaging and operating hours.
Assess solar against electricity demand from production equipment, ventilation, cooling, refrigeration and laboratory operations. Installation planning reflects your site’s access, safety and operational requirements.
Assess how solar can offset part of continuous IT and cooling demand, with careful electrical integration and coordination around critical operations.
Review refrigeration, lighting, ventilation and cooling loads alongside roof suitability and trading hours.
Assess extended operating hours, kitchens, laundry, ventilation and cooling to identify the electricity solar can realistically replace.
Review pumps, filtration, ventilation, cooling and other electrical loads. Distinguish electrical consumption from gas used for pool or space heating.
Reduce electricity costs across classrooms, IT, kitchens, lighting and ventilation, with a design that accounts for term-time use and school holidays. EPC plans installation around safeguarding, access and the school’s operating timetable.
Explore solar for workshops, lighting, cooling and EV charging, with particular attention to when vehicles actually charge.
Dairy farms, poultry units, produce packhouses and electrically intensive growing operations: assess refrigeration, ventilation, irrigation and processing loads.
Assess actual electricity demand, including automation, refrigeration and daytime fleet charging. A large roof alone does not mean high electricity use.
We also welcome village halls, charities, offices and smaller commercial premises. Every project is assessed on its own merits, with a system matched to your building, usage and budget.
Start with a free desktop assessment
You do not need to know how many panels you want. Start with your address and a little information about your electricity use. We will review the opportunity and explain what is worth investigating further.
Initial figures are indicative and subject to survey, technical checks and final design. Half-hourly electricity data, where available, helps us build a more accurate picture.
A recommended system size and indicative layout, with the site checks and approvals needed to progress.
Estimated annual generation and how much you could use on site, based on your electricity use.
Projected annual savings and payback, with clear assumptions and solar-only or battery comparisons where relevant.
A clear recommendation and the technical checks needed before survey and final design.
Solar and storage
For sites that use most of their electricity during the day, solar alone may offer a strong return. Where your usage and tariffs support it, battery storage can help you use surplus solar later or manage periods of higher demand. We will compare the options and explain where the additional investment makes sense.
:no_upscale())
For sites that use most of their electricity during the day, solar alone may offer a strong return.
:no_upscale())
Compare the additional investment against surplus solar, electricity tariffs and periods of higher demand.
We can also consider how future EV charging, electric heating, cooling or site expansion could change your energy demand.
Why EPC
Dedicated electrical engineers support your project throughout design, project management and quality control. EPC brings technical oversight, installation, commissioning and ongoing support together, giving you a clear point of contact and an accountable team from the first assessment to final handover.
Health, safety and fire-risk reduction are considered from the outset. We assess the needs of your building and operations, coordinate the relevant safety requirements and carry those considerations through system design, installation and quality checks.
:no_upscale())
Dedicated electrical engineers guide the design, support project delivery and oversee electrical quality control. Their technical oversight helps ensure the solar system is properly integrated with your site’s infrastructure, from the initial design through installation and commissioning.
:no_upscale())
Site-specific risk assessments and installation planning address roof access, work at height, electrical work and the needs of an occupied site. Clear coordination with your team helps protect staff, visitors and installers throughout the installation.
:no_upscale())
Fire-risk reduction informs equipment selection, layout, electrical installation and inspection from the outset. We coordinate with your site team and relevant specialists so the project design and delivery reflect your building’s fire-safety requirements throughout the solar installation.
:no_upscale())
Installation inspections, electrical testing and commissioning checks support a safe, properly documented handover. We explain your system’s monitoring and provide clear information for operation, ongoing maintenance and support, helping your team understand how to look after the completed installation.
Commercial experience
These organisations have worked with EPC on renewable-energy projects; the logos do not identify commercial solar installations.
:no_upscale())
:no_upscale())
:no_upscale())
:no_upscale())
:no_upscale())
One partner. One process.
Clear decisions, coordinated delivery and support for your team.
We review your building, energy use, budget and priorities.
We set out the proposed system, costs, generation, projected savings and payback.
We identify and coordinate the roof, electrical, grid connection and permission checks your project needs, with responsibilities clear in the proposal.
Our project team and dedicated electrical engineers coordinate access, deliveries, site-specific health and safety arrangements and any necessary electrical shutdowns with your team. Quality checks and fire-risk reduction measures remain part of the delivery plan.
We commission and hand over your system, explain its monitoring and offer ongoing maintenance and support.
Costs and funding
Compare ownership, monthly cost, savings and long-term responsibility alongside the installation price.
Own the system
Pay for the installation upfront and own the energy asset. This route suits businesses looking to retain more of the long-term saving.
Available tax or capital allowance treatment may help the commercial case, subject to advice.
Spread the investment
Spread the project cost over time while the system starts reducing imported electricity. Compare repayments against projected energy savings and consider the total cost over the agreement.
Finance is subject to approval and lender terms.
Finance is subject to approval and lender terms. Tax and capital allowance treatment depends on your business; seek advice from your accountant.
Power Purchase Agreement
A PPA can let an eligible business buy electricity from an on-site solar system at an agreed rate while a third party owns and maintains it.
Contract length, savings and end-of-term options depend on the site, usage and proposal.
Real Commercial projects
Real customers, real commercial solar projects. Explore how solar can be designed around different buildings, electricity needs and business priorities.
:no_upscale())
Project evidence awaiting review
Approved project name, location and installation scope to be supplied.
Reference image from the existing page; not yet assigned to this case study.
:no_upscale())
Project evidence awaiting review
Approved project name, location and installation scope to be supplied.
Reference image from the existing page; not yet assigned to this case study.
:no_upscale())
Project evidence awaiting review
Approved project name, location and installation scope to be supplied.
Illustrative building image; verified project details awaiting review.
EPC brings installation expertise, accreditations and technology relationships together. We keep the project joined up from design to handover.
:no_upscale())
:no_upscale())
:no_upscale())
:no_upscale())
Frequently asked questions
Solar designed around your site and how you use electricity.
Yes. We welcome enquiries from village halls, charities and smaller businesses as well as larger commercial sites. We assess each building on its own merits and explain whether solar makes practical and financial sense.
Payback can be as quick as three years on suitable sites, particularly where a high proportion of solar generation is used during the day. Your consumption, tariffs, installation cost and site conditions determine the result. We show the estimated payback for your project.
Solar can offset part of a data centre’s electricity demand where suitable space and electrical integration are available. The design must account for the existing infrastructure and operational requirements. It is assessed as part of the wider energy strategy.
Not necessarily. We assess when you use electricity and compare whether storage adds enough value to justify its cost.
We plan work around your site, including access, deliveries and any necessary shutdowns. Any expected disruption is discussed and agreed before installation.
Commercial solar cost depends on system size, roof type, access, electrical infrastructure, scaffolding or lifting requirements, monitoring, battery storage and funding route. EPC reviews your site and usage before giving a clear recommendation and quote.
It can, but the lease, landlord consent, roof responsibility and length of occupation need checking early. EPC can help identify the questions to resolve before the design progresses.
Many roof-mounted commercial solar installations can be permitted development, but planning, conservation, listed-building, grid and landlord requirements can vary. EPC will flag the checks that apply to your site.
Surplus electricity may be exported to the grid where metering and export arrangements allow it. For many businesses, the strongest savings come from using as much generated power on site as possible.
Solar PV has low routine maintenance compared with many building systems, but monitoring, inspections, cleaning where needed and periodic electrical checks help protect long-term performance.
Your next step
No panel count, technical specification or chosen funding route needed.
Whether you are exploring solar for a village hall, a showroom or a major commercial site, start with a conversation. Tell us about your building and we will help you understand the options, potential savings and next step.